Sony STR-DN1080 Help Guide Printable PDF - Page 139

It may not be possible to take the correct measurements or to perform Auto Calibration at all if special speakers such as dipole speakers are used. [151] Adjusting Settings Performing Auto Calibration 3. Connecting the calibration microphone Calibration microphone (supplied) 1 Connect the supplied calibration microphone to the CALIBRATION MIC jack. 2 Set up the calibration microphone. Place the calibration microphone at your listening position and set it at the same height as your ears. Note Insert the plug of the calibration microphone all the way into the CALIBRATION MIC jack. If the calibration microphone is not connected securely, measurements may not be made properly. Position the calibration microphone horizontally with the L (left) and R (right) ends at the same height. [152] Adjusting Settings Performing Auto Calibration 4. Selecting the front speakers You can select the front speakers you want to operate. Be sure to use the buttons on the receiver to perform this operation. 1 Press SPEAKERS on the receiver repeatedly to select the front speaker system you want to operate.