Sony STR-DN1080 Help Guide Printable PDF - Page 160

Hint You can also use PURE DIRECT on the receiver to turn the Pure Direct function on or off. You can also select [Pure Direct] in [Setup] - [Audio Settings] from the home menu. [178] Adjusting Settings Audio Settings Setting the low-pass filter for the subwoofer output (Subwoofer Low Pass Filter) You can turn the low-pass filter for the subwoofer output on or off. You can set the function for each input to which an audio input jack is assigned independently. Turn the function on if you connect a subwoofer without the crossover frequency function. 1 Select [Setup] - [Audio Settings] from the home menu. 2 Select [Subwoofer Low Pass Filter]. 3 Select the setting you want. On: Always activates the low-pass filter with a cutoff frequency of 120 Hz. Off: Does not activate the low-pass filter. Note This function does not work in the following cases: [Bluetooth Mode] is set to [Transmitter]. [DSD Native] is set to [On] and DSD signals are being played back. [179] Adjusting Settings Audio Settings Synchronizing audio with video output (A/V Sync) You can delay the output of audio to minimize the time gap between audio output and a visual display. This function is useful when using a large LCD or plasma monitor or a projector. You can set the function for each input independently. 1 Select [Setup] - [Audio Settings] from the home menu.