Sony STR-DN1080 Help Guide Printable PDF - Page 145
Adjusting the speaker level Level
View all Sony STR-DN1080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Note This function is not available when [Bluetooth Mode] is set to [Transmitter]. Hint To adjust the level of all speakers at the same time, press +/-. You can also use MASTER VOLUME on the receiver. The adjusted value is shown on the TV screen during adjustment. To output a test tone from adjacent speakers See "Adjusting the balance between adjacent speakers by outputting a test tone (Phase Noise)." To output the source sound from adjacent speakers See "Adjusting the balance between adjacent speakers by outputting a source sound (Phase Audio)." [158] Adjusting Settings Speaker Settings Adjusting the speaker level (Level) You can adjust the level of each speaker (front left/right, height left/right, center, surround left/right, surround back left/right and subwoofer). 1 Select [Setup] - [Speaker Settings] from the home menu. 2 Select [Level]. 3 Select the speaker whose level you want to adjust from the following. Front L, Center, Front R, Surround R, Surround L, Sur Back L, Sur Back (*), Sur Back R, Height L, Height R, Subwoofer * [Sur Back] appears when only one surround back speaker is connected. 4 Adjust the level. Note This function is not available when [Bluetooth Mode] is set to [Transmitter]. If headphones are connected, you can only adjust the level of front left and front right.