Sony STR-DN1080 Help Guide Printable PDF - Page 39
Connecting a TV and a projector, Connecting a TV without HDMI jacks
View all Sony STR-DN1080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Sony recommends that you use an HDMI cable made by Sony or another HDMI-authorized cable. Be sure to use a High Speed HDMI Cable with Ethernet. Premium High Speed HDMI Cable with Ethernet that supports 18 Gbps is required for 4K/60p 4:4:4, 4:2:2, and 4K/60p 4:2:0 10 bit, etc. For this connection, you need to turn the Control for HDMI function on. Press HOME to display the home menu, select [Setup] - [HDMI Settings], and set [Control for HDMI] to [On]. Also turn on the Audio Return Channel (ARC) function on the TV. Hint If the HDMI jack of the TV (labeled "ARC") is already connected to another device, disconnect the device and connect the receiver. Connecting a TV and a projector HDMI cable (not supplied) Note Sony recommends that you use an HDMI cable made by Sony or another HDMI-authorized cable. Be sure to use a High Speed HDMI Cable with Ethernet. Premium High Speed HDMI Cable with Ethernet that supports 18 Gbps is required for 4K/60p 4:4:4, 4:2:2, and 4K/60p 4:2:0 10 bit, etc. When outputting the same image to the projector as to the TV, select [Setup] - [HDMI Settings] and set [HDMI Out B Mode] to [Main], then select [HDMI B] or [HDMI A+B] by pressing HDMI OUT. When outputting different images to the TV and the projector, use the multi-zone feature by setting [HDMI Out B Mode] to [Zone]. Connecting a TV without HDMI jacks Solid lines show recommended connections and the dashed lines show alternative connections for audio signals. It is not necessary to connect all the cables.