Sony STR-DN1080 Help Guide Printable PDF - Page 150

[164] Adjusting Settings Speaker Settings Selecting the speaker pattern (Speaker Pattern) You can select the speaker pattern you want according to your speaker installation. 1 Select [Setup] - [Speaker Settings] from the home menu. 2 Select [Speaker Pattern]. 3 Select the speaker pattern appropriate to your speaker configuration under [Listener-level Speakers] by referring to the speaker installation example displayed on the TV screen. 4 Select the speaker pattern appropriate to your speaker configuration under [Height/Overhead Speakers] by referring to the speaker installation example displayed on the TV screen. 5 Select [Save]. Note This function does not work in the following cases: Headphones are connected. [Bluetooth Mode] is set to [Transmitter]. If a speaker pattern with surround back speakers is selected, you cannot set [Height/Overhead Speakers]. If you select a speaker pattern with the speakers connected to the SPEAKERS SURROUND BACK/HEIGHT terminals and select [Save], [Zone2 Power] will be set to [Off] automatically (for USA and Canadian models only). [165] Adjusting Settings Speaker Settings Checking the speaker position and the corresponding speaker terminals (Speaker Connection Guide) This function lets you know the position of the speaker you select and the corresponding speaker terminals on the receiver to which the speaker should be connected. 1 Select [Setup] - [Speaker Settings] from the home menu. 2 Select [Speaker Connection Guide]. A message appears.