Sony STR-DN1080 Help Guide Printable PDF - Page 140
Performing Auto Calibration
View all Sony STR-DN1080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
The indicators on the display panel shows which set of terminals are selected. SPA: Speakers connected to the SPEAKERS FRONT A terminals. SPB (*): Speakers connected to the SPEAKERS SURROUND BACK/HEIGHT terminals. SPA+B (*): Speakers connected to both the SPEAKERS FRONT A and SPEAKERS SURROUND BACK/HEIGHT terminals (parallel connection). (None): [SPK OFF] appears on the display panel. No audio signals are output from any speaker terminals. * To select [SPB] or [SPA+B], set the assignment for the SPEAKERS SURROUND BACK/HEIGHT terminals to [Front B] by using [Surround Back Speaker Assign] in the [Speaker Settings] menu. Note This setting is not available when headphones are connected. When you press SPEAKERS on the receiver, the [Bluetooth Mode] changes to [Receiver] automatically. [153] Adjusting Settings Performing Auto Calibration 5. Performing Auto Calibration You can perform automatic calibration from your listening position. 1 Select [Setup] - [Speaker Settings] from the home menu. 2 Select [Auto Calibration]. 3 When you use height/overheard speakers, select [Change Surround Back Speaker Assign], and then select [Height Speakers] on the next screen. 4 Select [Proceed to configure the speaker pattern], and then set the speaker pattern on the next screen. If you have set [Height/Overhead Speakers] to a value other than [FH] or [---], set [Ceiling Height] on the