Sony STR-DN1080 Help Guide Printable PDF - Page 149
Assigning the surround back speaker terminals Surround Back, Speaker Assign
View all Sony STR-DN1080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
4 Press / to set the crossover frequency. Note This function does not work in the following cases: Headphones are connected. [Bluetooth Mode] is set to [Transmitter]. [Size] for none of the speakers is set to [Small]. The surround back speakers will be set to the same setting as that of the surround speakers. [163] Adjusting Settings Speaker Settings Assigning the surround back speaker terminals (Surround Back Speaker Assign) You can set the assignment for the SPEAKERS SURROUND BACK/HEIGHT terminals. 1 Select [Setup] - [Speaker Settings] from the home menu. 2 Select [Surround Back Speaker Assign]. 3 Select the desired speaker pattern according to the speaker installation example displayed on the TV screen, then select [Save]. 4 Select the setting you want (*). Off: When none of the following connections is used. Front B: When using the front B speaker connection. BI-AMP: When using the bi-amplifier speaker connection. Zone2 (for European and Asia-Pacific models only): When using the Zone 2 connection. * The displayed settings vary depending on the speaker pattern you selected. Note You can only set [Surround Back Speaker Assign] under the following conditions: The speaker pattern is set to a setting without surround back and height/overhead speakers. Headphones are not connected. [Bluetooth Mode] is set to other than [Transmitter].