Sony STR-DN1080 Help Guide Printable PDF - Page 217

4 Adjust the speaker level using MASTER VOLUME on the receiver. Available speakers: FL/FR (Front left/Front right) FL/CNT (Front left/Center) CNT/FR (Center/Front right) FR/SR (Front right/Surround right) SR/SBR (Surround right/Surround back right) SR/SB (Surround right/Surround back) SBR/SBL (Surround back right/Surround back left) SR/SL (Surround right/Surround left) SBL/SL (Surround back left/Surround left) SB/SL (Surround back/Surround left) SL/FL (Surround left/Front left) HTL/HTR (Height left/Height right) FL/SR (Front left/Surround right) SL/FR (Surround left/Front right) FL/HTR (Front left/Height right) HTL/FR (Height left/Front right) Note Some items may not appear, depending on the connected speakers. This function is canceled if you perform any operation other than the following: Volume adjustment Level adjustment of each speaker Turning the muting function on/off This function is not available when [Bluetooth Mode] is set to [Transmitter]. Hint Select [OFF] in step 3 to disable the Phase Noise function. Adjusting the balance between adjacent speakers by outputting a source sound (Phase Audio) You can output the source sound from adjacent speakers to adjust the balance between the speakers. This operation is only available using the display panel on the front of the receiver. 1 Press AMP MENU. The menu is displayed on the display panel of the receiver. 2 Select [] (Level settings) - [P. AUDIO].