Sony STR-DN1080 Help Guide Printable PDF - Page 120

You can enjoy sound from the receiver in Zone 2 by the following procedure. Note Users of USA and Canadian models need to set the priority on the Zone 2 speakers beforehand by following the procedure in "Setting the priority on the surround back speakers or Zone 2 speakers (SURROUND BACK/ZONE2 Priority) (for USA and Canadian models only)." Users of European or Asia-Pacific models need to configure the speakers installed in Zone 2 beforehand by following the procedure in "Configuring speakers installed in Zone 2 (for European and Asia-Pacific models only)." 1 Select [Zone Controls] - [Zone2 Power] - [On] from the home menu. Zone 2 is activated. 2 Select the source signals you want to output in [Zone2 Input]. Select [SOURCE] if you want to listen to the same sound as main zone in Zone 2. 3 Start playback on the input that you selected in step 2. 4 Adjust to a suitable volume in [Zone2 Volume]. Hint You can also activate the zone you want using ZONE SELECT and ZONE POWER on the receiver. You can also select source signals you want to output using INPUT SELECTOR on the receiver while [2. xxxx(input name)] is shown on the display panel. You can also adjust volume using MASTER VOLUME on the receiver while [2. xxxx (input name)] is shown on the display panel. To exit zone operation Select [Zone Controls] - [Zone2 Power] from the home menu, then select [Off]. Available input for zone operations See "Available inputs for each zone." Hint A dedicated App for this model SongPal enables easier zone operation such as changing the settings or switching the zone inputs from your smartphone or tablet.