Sony STR-DN1080 Help Guide Printable PDF - Page 29

* Set the height of a tweeter of the front speaker at the same height as your ears. Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want. [18] Preparation 1. Installing speakers Speaker configuration and speaker pattern settings Select the speaker pattern according to the speaker configuration which you are using. The table below shows examples of speaker configurations and speaker pattern settings. Speaker configuration in each zone Main zone Zone 2 [Surround Back Speaker Assign] (*1) 5.1-channel Not used - 7.1-channel using surround back speakers Not used - 5.1.2-channel using top middle speakers Not used - 5.1.2-channel using Dolby Atmos enabled speakers Not used - 5.1-channel with Zone 2 connection 2channel [Off] (*2)/[Zone2] (*3) 5.1-channel with bi-amplifier connection Not used [BI-AMP] 5.1-channel with front B speaker connection Not used [Front B] 2.1-channel (for enjoying Front Surround) Not used - [Speaker Pattern] setting [5.1] [7.1] [5.1.2 (TM)] [5.1.2 (FD)] [5.1] [5.1] [5.1] [2.1] *1 You can only set [Surround Back Speaker Assign] if the speaker pattern is set to a setting that does not have surround back and height/overhead speakers. *2 For USA and Canadian models only *3 For other models only Hint