Sony STR-DN1080 Help Guide Printable PDF - Page 56
Setting up the receiver using Easy Setup, About Auto Calibration, Before you perform Auto
View all Sony STR-DN1080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Setting up the receiver using Easy Setup When you turn on the receiver for the first time or after the receiver is initialized, the Easy Setup screen appears on the TV screen. You can set up the following settings for the receiver by following the instructions on the Easy Setup screen. Select your language (for USA, Canadian, European and Australian models only) Select the language of messages on the screen. Speaker Settings Check your speaker system and perform automatic calibration according to the configuration and arrangement of your speaker system. Internet Settings Select the network connection method and configure settings to connect the receiver to the network. Note Switch the input of the TV to the input to which the receiver is connected to use this function. Auto Calibration is not available when [Bluetooth Mode] is set to [Transmitter]. If the Easy Setup screen does not appear or you want to display the Easy Setup screen manually, you can display it by selecting [Setup] - [Easy Setup] from the home menu. [47] Preparation Performing Auto Calibration 1. About Auto Calibration Auto Calibration allows you to perform automatic calibration as follows. Check the connection between each speaker and the receiver. Adjust the speaker level. Measure the distance of each speaker from your seating position. (*1) Measure the speaker size. (*1) Measure the frequency characteristics (EQ). (*1) Measure the frequency characteristics (Phase). (*1)(*2) *1 The measurement result is not utilized when [Direct] is selected for the sound field setting and an analog input is selected. *2 The measurement result may be not utilized, depending on the audio formats. Note The D.C.A.C. is designed to achieve proper sound balance for your room. However, you can adjust the speaker levels manually according to your preference using [Test Tone] in the [Speaker Settings] menu. [48] Preparation Performing Auto Calibration 2. Before you perform Auto Calibration