Sony STR-DN1080 Help Guide Printable PDF - Page 42
About input/output of video signals, Notes on connecting cables
View all Sony STR-DN1080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Note Sony recommends that you use an HDMI cable made by Sony or another HDMI-authorized cable. Be sure to use a High Speed HDMI Cable with Ethernet. Premium High Speed HDMI Cable with Ethernet that supports 18 Gbps is required for 4K/60p 4:4:4, 4:2:2, and 4K/60p 4:2:0 10 bit, etc. [29] Preparation 3. Connecting a TV About input/output of video signals The digital video signals input to the HDMI IN jacks of this receiver are output from HDMI OUT A (TV) or HDMI OUT B/HDMI ZONE jacks only. The analog video signals input from VIDEO IN jacks are output from the MONITOR OUT jack only. Use the following illustration as reference when you connect the receiver, AV device, and TV. Note When you connect the TV to the MONITOR OUT jack, the home menu of this receiver is not displayed on the TV screen. To operate this receiver using the menu on the TV screen, connect the TV to the HDMI OUT A (TV) or HDMI OUT B/HDMI ZONE jacks. [30] Preparation 3. Connecting a TV Notes on connecting cables Before connecting cables, be sure to disconnect the AC power cord (mains lead). It is not necessary to connect all of the cables. Connect cables according to the availability of jacks on the connected device. Sony recommends that you use an HDMI cable made by Sony or another HDMI-authorized cable. Be sure to use a High Speed HDMI Cable with Ethernet. Premium High Speed HDMI Cable with Ethernet that supports 18 Gbps