Sony STR-DN1080 Help Guide Printable PDF - Page 161

2 Select [A/V Sync]. 3 Select the setting you want. 0 ms - 300 ms: You can adjust the delay from 0 ms to 300 ms in 10 ms intervals. HDMI Auto: The time gap between the audio output and visual display of a TV connected via an HDMI connection will be adjusted automatically. This feature is available only when the TV supports the A/V Sync function. Note The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals, depending on the audio format. This function is not available in the following cases: [Bluetooth Mode] is set to [Transmitter]. [DSD Native] is set to [On] and DSD signals are being played back. [180] Adjusting Settings Audio Settings Selecting the language of digital broadcasts (Dual Mono) You can select the language you want when listening to a digital broadcast with dual audio. This function only works for Dolby Digital sources. 1 Select [Setup] - [Audio Settings] from the home menu. 2 Select [Dual Mono]. 3 Select the setting you want. Main: Sound in the main language will be output. Sub: Sound in the sub language will be output. Main/Sub: Sound in the main language will be output through the front left speaker and sound in the sub language will be output through the front right speaker simultaneously. [181] Adjusting Settings Audio Settings Compressing the dynamic range (Dynamic Range Compressor) You can compress the dynamic range of the soundtrack. This may be useful when you want to watch movies at a low volume late at night, etc.