Sony STR-DN1080 Help Guide Printable PDF - Page 177

In [Transmitter] mode, this receiver can send audio to up to 1 device. Hint You can set the transmission data rate for LDAC playback using [Wireless Playback Quality] in the [Bluetooth Settings] menu. If you connect to this receiver from your smartphone while [Transmitter] is selected and no other BLUETOOTH receiver is connected to this receiver, the setting automatically switches to [Receiver] and you can listen to the sound from your smartphone via this receiver. You can also switch between [Receiver] (RX) mode and [Transmitter] (TX) by pressing BLUETOOTH RX/TX on the remote control. Depending on the BLUETOOTH receiver, you can adjust the volume of the BLUETOOTH receiver from this receiver when [Transmitter] is selected. [207] Adjusting Settings Bluetooth Settings Checking the BLUETOOTH device list (Device List) You can check a list of the paired and detected BLUETOOTH receivers such as headphones when [Bluetooth Mode] is set to [Transmitter]. You can perform pairing with detected devices from the list. 1 Select [Setup] - [Bluetooth Settings] from the home menu. 2 Select [Device List]. Hint Select [Scan] to refresh the list. [208] Adjusting Settings Bluetooth Settings Setting the BLUETOOTH Standby mode (Bluetooth Standby) You can set the BLUETOOTH Standby mode so that this receiver can be controlled by a BLUETOOTH device even when this receiver is in standby mode. 1 Select [Setup] - [Bluetooth Settings] from the home menu. 2 Select [Bluetooth Standby].