Sony STR-DN1080 Help Guide Printable PDF - Page 148
Setting the crossover frequency of the speakers Crossover, Frequency
View all Sony STR-DN1080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
3 Select the speaker whose size you want to adjust from the following. Front, Center, Surround, Height 4 Select the size you want. Large: If you connect large speakers that will effectively reproduce bass frequencies, select [Large]. Select [Large] usually. Small: If the sound is distorted, or you hear a lack of surround effects when using multi channel surround sound, select [Small]. You can activate the bass redirection circuitry and output the bass frequencies of each channel from the subwoofer or other [Large] speakers. Note [Size] cannot be set in the following cases: Headphones are connected. [Bluetooth Mode] is set to [Transmitter]. [Speaker Pattern] is set to [2.0]. Hint The surround back speakers will be set to the same setting as that of the surround speakers. When the front speakers are set to [Small], the center, surround, and surround back/height speakers are also automatically set to [Small]. If you do not use the subwoofer, the front speakers are automatically set to [Large]. [162] Adjusting Settings Speaker Settings Setting the crossover frequency of the speakers (Crossover Frequency) You can set the bass crossover frequency of speakers for which [Size] in the [Speaker Settings] menu has been set to [Small]. A measured speaker crossover frequency is set for each speaker after the Auto Calibration is performed. 1 Select [Setup] - [Speaker Settings] from the home menu. 2 Select [Crossover Frequency]. 3 Select the speaker for which you want to adjust the crossover frequency on the screen.