Sony STR-DN1080 Help Guide Printable PDF - Page 159

3 Select the setting you want. On: This function is available for DSD signals. Off: Does not activate the direct playback of DSD signals (DSD Native). Note This function does not work in the following cases: [Bluetooth Mode] is set to [Transmitter]. The Wireless Multi-Room function is activated. When [DSD Native] is set to [On] and DSD signals are being played back, the settings of [Equalizer], [Sound Optimizer] and [Subwoofer Low Pass Filter], etc., are invalid, and the sound field does not work. Hint You can also use DSD NATIVE on the remote control to turn on this function. [177] Adjusting Settings Audio Settings Enjoying high-fidelity sound (Pure Direct) You can enjoy higher-fidelity sound from all inputs using the Pure Direct function. When the Pure Direct function is on, the display panel lights off to suppress noise that affects sound quality. 1 Select [Sound Effects] - [Pure Direct] from the home menu. 2 Select [On]. Canceling Pure Direct The Pure Direct function will be canceled when you perform the following: Select [Off] in step 2. Press PURE DIRECT on the receiver. Change the sound field. Change the scene setting on the TV (Scene Select). Change the setting of [Automatic Phase Matching], [Calibration Type] or [Equalizer] in the [Speaker Settings] menu. Change the setting of [Sound Optimizer], [In-Ceiling Speaker Mode] or [Dynamic Range Compressor] in the [Audio Settings] menu. Note [Automatic Phase Matching], [Calibration Type], [Equalizer], [Sound Optimizer], [In-Ceiling Speaker Mode] and [Dynamic Range Compressor] do not work when the Pure Direct function is selected.