Sony STR-DN1080 Help Guide Printable PDF - Page 122
Enjoying sound using another amplifier in Zone 2
View all Sony STR-DN1080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Note When [Variable] is set, the volume is turned down by default. Turn up the volume while listening to the sound after completing setup. The volume for the SPEAKERS ZONE 2 (*1) or SPEAKERS SURROUND BACK/HEIGHT (*2) terminals is changed together with the volume for the AUDIO ZONE 2 OUT jacks. *1 For USA and Canadian models only *2 For other models only [123] Using the Multi-Zone Features Enjoying sound in two rooms using another amplifier Enjoying sound using another amplifier in Zone 2 You can enjoy sound from another amplifier in Zone 2 by the following procedure. 1 Select [Zone Controls] - [Zone2 Power] - [On] from the home menu. Zone 2 is activated. 2 Turn on the amplifier in Zone 2. 3 Select the source signals you want to output in the [Zone2 Input]. Select [SOURCE] if you want to listen to the same sound as main zone in Zone 2. 4 Start playback on the input that you selected in step 3. 5 Adjust to a suitable volume. Adjust the volume using the amplifier in Zone 2. If you set [Zone2 Line Out] to [Variable], you can also adjust the volume in Zone 2 using [Zone Controls] - [Zone2 Volume] from the home menu. Hint You can also activate Zone 2 using ZONE SELECT and ZONE POWER on the receiver. You can also select source signals you want to output using INPUT SELECTOR on the receiver while [2. xxxx (input name)] is shown on the display panel. You can also adjust volume using MASTER VOLUME on the receiver while [2. xxxx (input name)] is shown on the display panel.