Bernina Artista 730E User Guide - Page 12

Accessories* The following accessories are arranged separately in the styrofoam packing or later in the suitcase system (special accessory): • foot control • instruction manual • power cable • warranty card • FHS presser foot lifter (Free Hand System) • slide-on table • seam guide for slide-on table • Seasons of Artistry • Instructional / Presentation CD-ROM • Design / Tutorial USB-Stick • BSR System • Carrier Bag • Touch Screen Stylo • for more information for Instructional / Presentation CD-ROM see page 194 Carrier Bag • protects from dust and dirt ™ this bag can be used to transport the sewing computer. The accessories can be stored in the corresponding compartments Accessory Box Standard Accessories* A Storing Accessories ™ set up the free standing accessory box by pulling both extensions out until they click into place Both accessory boxes are equipped with one small and one large drawer each as well as two compartments for bobbins, two compartments for coded presser feet and one compartment for non-coded presser feet. The compartments can be stored in the box (additional compartments and drawers are available as optional extras). ™ insert the bobbins into the compartments provided ™ to remove a bobbin, press the compartment holder A lightly ™ hang presser feet in the compartments provided ™ store the remaining accessories as shown in the picture Suitcase System (special accessory) The suitcase system is specially built for your sewing and embroidery computer and has integrated wheels. This allows your system to be transported easily and elegantly. • four bobbins (+ one in bobbin case) • selection of 130/705 H needles • seam ripper • small screwdriver • angular Torx key • lint brush • seam guide • 2 foam pads • Reverse pattern foot No. 1C • Overlock foot No. 2A • Buttonhole foot with code No. 3C • Automatic buttonhole foot No. 3A • Zipper foot No. 4 • Blind stitch foot No. 5 • Jeans foot No. 8 • Button sew-on foot No. 18 • Open embroidery foot No. 20C • Sideways motion foot No. 40C • Compensation plate for sewing buttonholes • height compensating tool • three spool discs • oiler • USB Cable *(can vary from country to country) • for more information see page 262 10 The Sewing Computer - Setting up the Sewing Computer