Bernina Artista 730E User Guide - Page 209

Starting to Embroider With the Quick Reverse Button on Head Frame ™ lower the presser foot ™ keep the Quick Reverse button on the head frame depressed until the embriodery computer starts • the embroidery computer will sew approximately 6 stitches and stop automatically ™ raise the presser foot ™ cut the thread tail at the beginning of motif ™ lower the presser foot ™ press the Quick Reverse button to resume embroidering Starting to Embroider With Foot Control ™ lower the presser foot ™ press the foot control • the embroidery computer will stop automatically after approx. 6 stitches ™ release the foot control ™ raise the presser foot ™ cut the thread tail at the beginning of motif ™ lower the presser foot ™ when embroidering using the foot control, it must continu- ously be pressed Embroidery Screen • after starting to embroider the Embroidery screen appears Interrupting Embroidery ™ when the embroidery computer is embroidering, press Quick Reverse button on head frame or tap the foot control lightly • the embroidery computer will stop immediately Completing the Color ™ lower the presser foot again ™ press Quick Reverse button or the foot control again • the embroidery computer embroiders all the sections in the color activated • the embroidery computer stops automatically when complete • both threads are automatically cut with the Automatic Thread Cutter • message appears "Color finished attach new thread" • acknowledge by touching «OK» Changing Color • the embroidery computer is automatically ready to embroider the next color ™ change color of the upper thread accordingly ™ embroider with the new color as described above Cutting Thread Ends After Embroidery ™ raise the presser foot ™ remove the embroidery hoop from the embroidery arm ™ cut away any remaining excess threads and connecting threads ™ take care that the bobbin thread is not cut too closely to the stitch plate when removing the embroidery hoop 205 The Embroidery Computer - Starting to Embroider