Bernina Artista 730E User Guide - Page 14

Slide-on Table Slide-on Table • the slide-on table increases the sewing surface • free arm for larger tubular items such as pant legs and waistbands To Attach ™ needle and presser foot fully raised ™ slide over free arm to the right until it engages To remove ™ needle and presser foot fully raised ™ pull to the left ™ remove by pulling it completely from the free arm Seam Guide ™ insert into the groove (underside of table) from the right or left • it can be freely adjusted over the whole width of the table Scale number «0» on the slide-on table corresponds to the center needle position Screen The artista 730 is operated with a combination of external buttons and knobs and a touch screen. Welcome Screen ™ switch sewing computer on: power switch to «1» (on) • Welcome screen appears for a few seconds • can be personalized in the Setup Program Practical Stitch Screen After the Welcome the Practical Stitch screen appears automatically on the screen, which shows: A B FC D EJ A Presser Foot Indicator B Stitch width (basic setting always visible) C Selected, active stitch and number G D Single Mode E Combi Mode L F Needle Position (11 possibilities) H G Stitch length (basic setting always visible) H Picture of selected, active stitch and number (Stitch Altering Area) J Up/down scroll arrows K Help symbol M NK L Main category buttons M Functions N Stitch Selection by Number 12 The Sewing Computer - Setting up the Sewing Computer