Bernina Artista 730E User Guide - Page 16

Inserting the Bobbin Inserting the Bobbin ™ insert the bobbin so that the thread runs clockwise Pulling the Thread Into the Slot ™ pull the thread counter clockwise into the slot Pulling the Thread Under the Spring ™ pull the thread to the left under the spring until it lies in the T-shaped slit at the end of the spring Clockwise Turning of the Bobbin • the bobbin must turn clockwise when the thread is pulled Threading the Upper Thread A C B D E Attaching the Thread Spool ™ raise the needle and presser foot ™ turn the power switch to «0» (off) ™ attach the foam pad ™ place spool on pin (thread winds clockwise) ™ attach the appropriate spool disc - diameter of spool determines disc size. There must be no clearance between the disc and the spool ™ take thread through rear guide A ™ then into slit of upper thread tension Down ™ pull thread down to the right of the take-up cover to B Up ™ take thread up to the left of the cover to C in the direction of the arrow, placing it in the takeup lever Down ™ take thread down and through guides D and E ! Refer to the safety instructions! 14 The Sewing Computer - Operating Instructions