Bernina Artista 730E User Guide - Page 22
Presser Feet
View all Bernina Artista 730E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Presser Feet Note: The letter «C» after a foot number indicates the foot is coded or equipped with a sensor for 9mm stitching. When a stitch is selected with a coded foot attached to the sewing computer, the preprogrammed width is 9mm, rather than 5.5mm. 1C Reverse pattern foot Practical and decorative stitches 2A Overlock foot Overlock seams, oversewing seam edges 3C Buttonhole foot with code Buttonholes (shows as foot No. 3C on-screen) 3A 4 Automatic buttonhole Zipper foot foot Sewing in zippers Buttonholes in flat materials Darning program (shows as foot No. 3A on-screen) 5 Blind stitch foot Blind hems Edge stitching 8 Jeans foot Straight stitching in thick, firm fabrics 18 Button sew-on foot Sewing on buttons, hooks and eyes 20C Open embroidery foot Embroidery, appliqué, satin stitch seams, monograms 40C Sideways motion foot For all sideways motion stitches BERNINA Specialty Presser Feet The standard selection of presser feet covers most normal sewing requirements, but we recommend the use of BERNINA specialty presser feet for specific sewing tasks such as quilting, heirloom sewing, home decorating, tailoring, etc. They are available from your BERNINA dealer. Samples of Specialty Presser Feet 50 Walking foot For fabrics which stick or tend to slip and for quilting 9 Darning foot Used with the feed dog in a lowered position for darning, monograms, and freehand embroidery 20 The Sewing Computer - Operating Instructions