Bernina Artista 730E User Guide - Page 17
Needle Threader, Bringing up the Lower Thread, Thread Cutter, Changing the Needle
View all Bernina Artista 730E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Needle Threader A B Thread in Hook lower the presser foot lay the thread behind hook B and hold lightly Lever Down press lever A down and simultaneously guide the thread around hook B to the right to the needle Thread in Front of Needle put the thread from the front into the guide until it catches in the hook Release the Lever and Thread let go of lever A and thread pull the thread loop through the needle eye Bringing up the Lower Thread • if bobbin thread is cut on the cutter (page 13), there is no need to bring the thread to the top of the stitch plate hold the upper thread sew one stitch: • normal sewing with presser foot down • by tapping on foot control with your heel, with presser foot up pull the upper thread to bring the lower thread up through the stitch plate hole take both threads through the slit on the presser foot to the back pull threads over the head frame cutter Thread Cutter Thread Cutter on Head Frame pull both threads from front to back over the cutter • the threads release as soon as the first stitch is sewn Note: The bobbin thread must be brought up through the stitch plate for certain types of work. The length of thread is sufficient for most normal work if the lower thread cutter has been used. Changing the Needle ! Refer to the safety instructions! Removing the Needle raise the needle turn power switch to «0» (off) lower the presser foot loosen the needle clamp screw pull the needle down to remove Inserting the Needle loosen the needle clamp screw, if needed flat side of needle to the back insert the needle as far up as it will go tighten the needle clamp screw The Sewing Computer - Operating Instructions 15