Bernina Artista 730E User Guide - Page 87

Inserting the Cord (gimp cord) ™ remove stitch plate from sewing computer (see page 17) ™ open bobbin cover ™ thread cord from underneath plate through the bobbin area and the hole in stitch plate ™ replace stitch plate ™ close bobbin cover • the cord should feed freely - guide it through the small opening in the bobbin cover ™ place the cord spool on the arm of the free hand system (presser foot lifter) ™ check that the cord runs smoothly Threading the Needle ™ insert double needle ™ activate the double needle limitation (corresponding to needle size used) in the Security Program • for more details on Security Program see page 32 thread both needles • for more details on Threading the Double Needle see page 16 Stitching the Pintucks ™ stitch first tuck - you may want to mark the line first • the filler cord will automatically feed into the pintuck ™ turn work if required ™ place first pintuck in one of the side grooves in the presser foot (depending on the desired distance) ™ stitch second pintuck • stitch additional pintucks parallel to these two Decorative Stitches - Applications 85