Bernina Artista 730E User Guide - Page 27

Changing Basic Settings ™ alter the stitch width and length settings using the external knobs ™ alter the needle position with the external buttons ™ touch Stitch Altering Area (light blue) • a special screen opens ™ touch «Save Settings» = all changes are saved ™ touch «Reset Settings» to return to basic settings ™ touch «ESC» and the screen closes without anything being saved or altered • for more information on the lower two bars see Personal Program on page 156 Stitch Selection Stitches can be selected using one of the two methods listed below. Note: If an unavailable number is entered, the following message will appear: This number is not available in the sewing computer. Direct Selection by Scrolling up/down Within a Stitch Category ™ touch the arrow (down) • scroll the screen to view all stitches in selected category • the top row disappears • the next two rows move up • a new row appears at the bottom ™ touch the arrow (up) • the first row of stitches appears again • the Scroll function (up/down) is used to find and view all the sewing computer's stitches • use when a visual search for a particular stitch is needed • when the desired stitch is located, touch to select Selecting a Stitch by Number ™ touch the function «0-9» • the screen changes to a numeric pad ™ touch numbers to select the stitch of your choice • the number of the selected stitch appears in the upper screen Correcting Mistakes ™ to correct mistakes or deselect, touch function top right (arrow) • the number is deleted from right to left ™ touch the field above the numeric pad • the entire number is deleted ™ enter new number Confirm and Go to Next Screen ™ touch «OK» to confirm • the screen displays the selected stitch • the selected stitch is active (highlighted in blue) Back to Previous Screen ™ touch «ESC» • the previous screen appears • if the selection was not confirmed by touching «OK», the stitch selected by number will be ignored The Sewing Computer - Screen Display 25