Bernina Artista 730E User Guide - Page 191

Messages Notes • The authentication for the provider failed. Please check the username and the password. Check the settings in the Setup Program and try again. • The communication with the provider was interrupted. Connecting problems occurred. Try to enter Please try later or use another provider. another provider if possible, or try again. • An unknown error occurred with the Modem. Please try again. Remove modem, then reconnect. • You cannot save or delete files on the myartista Portal. The «myartista» portal provides tips and news. • A problem occurred in communicating with the myartista Portal. Please try again. Try to connect to the «myartista» portal again. Remove and reconnect modem if necessary. • To keep your sewing/embroidery computer performing at its best, it's time to complete the following tasks. Remove thread and lint from beneath the stitch plate, as well as from the feed dog area. These instructions can be found on page 185 of the manual. This notification will appear after approx. 180,000 stitches. After cleaning/oiling clear the display by touching «OK». The display can be cleared temporarily by touching «ESC», but will appear again when restarting the sewing computer. After clearing with «ESC» for the third time, the cleaning notification will only appear again after a further approx. 180,000 stitches. • It's time for your regular service check. Please contact your BERNINA dealer for an appointment. The sewing computer must be taken for a service to a BERNINA dealer. The notification will appear after approx. 2,000,000 stitches. If the service was done bythe BERNINA dealer, the stitch counter will be on «0» again and the display does not appear anymore. The display can be cleared temporarily by touching «ESC», but will appear again when restarting the sewing computer. After clearing with «ESC» for the third time, the notification will appear again at approx. 4,000,000 stitches. • You have opted not to take your sewing/embroidery computer to your BERNINA dealer for its service check. This message will not appear until it's time for the next regular service. Flawless functioning of the sewing/embroidery computer can not be guaranteed if the servicing is not carried out at the recommended regular intervals. • Please insert USB data stick that includes the video-film tutorials and press «OK». Connect the USB data stick to sewing/ embroidery computer that includes video-film tutorials on various sewing techniques and topics. • Main Motor failed. Please check hook system. Open the bobbin cover. Remove any thread lint from the hook area/bobbin case. 189 Sewing and Sewing Computer Support - Messages