Dell Precision T3400 User's Guide - Page 196
To install a SAS hard drive, Connect the other end of the SAS cable to the SAS controller card.
View all Dell Precision T3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
1 2 3 4 5 6 1 serial ATA cable 3 SATA1 connector 5 secondary hard drive bay 2 SATA0 connector 4 power cable 6 hard drive in primary hard drive bay To install a SAS hard drive: a Connect the power cable to the SAS connector. b Connect the SAS connector to the hard drive. c Connect the other end of the SAS cable to the SAS controller card. 9 Ensure that all connectors are properly cabled and firmly seated. 10 Replace the computer cover (see "Replacing the Computer Cover" on page 262). NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer. 196 Adding and Replacing Parts
196
Adding and Replacing Parts
To install a SAS hard drive:
a
Connect the power cable to the SAS connector.
b
Connect the SAS connector to the hard drive.
c
Connect the other end of the SAS cable to the SAS controller card.
9
Ensure that all connectors are properly cabled and firmly seated.
10
Replace the computer cover (see "Replacing the Computer Cover" on
page 262).
NOTICE:
To connect a network cable, first plug the cable into the network port or
device and then plug it into the computer.
1
serial ATA cable
2
SATA0 connector
3
SATA1 connector
4
power cable
5
secondary hard drive bay
6
hard drive in primary hard drive
bay
6
4
1
2
5
3