Dell Precision T3400 User's Guide - Page 204
If you are removing a SATA drive
View all Dell Precision T3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
6 If you are removing a SATA drive, disconnect the serial ATA cable from the back of the hard drive and from the SATA connector on the system board. 1 2 3 4 5 1 power cable 2 power supply 3 serial ATA cable 4 SATA connector 5 optional serial ATA hard drive in lower 5.25-inch drive bay 7 If you are removing a SAS drive: a Disconnect the power cable form the SAS connector. b Disconnect the SAS connector from the hard drive. c Disconnect the SAS connector from the SAS controller card. 8 Slide the sliding-plate lever to the right to release the shoulder screw and slide the drive out of the lower 5.25-inch drive bay. 204 Adding and Replacing Parts
204
Adding and Replacing Parts
6
If you are removing a SATA drive,
disconnect the serial ATA cable from the
back of the hard drive and from the SATA connector on the system board.
7
If you are removing a SAS drive:
a
Disconnect the power cable form the SAS connector.
b
Disconnect the SAS connector from the hard drive.
c
Disconnect the SAS connector from the SAS controller card.
8
Slide the sliding-plate lever to the right to release the shoulder screw and
slide the drive out of the lower 5.25-inch drive bay.
1
power cable
2
power supply
3
serial ATA cable
4
SATA connector
5
optional serial ATA hard drive in
lower 5.25-inch drive bay
1
2
3
4
5