HP J5780 User Guide - Macintosh - Page 156
To change the copy quality
UPC - 882780940253
View all HP J5780 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Chapter 11 To set the paper type for printing 1. Make sure you have paper loaded in the input tray. 2. From the File menu in your software application, choose Print. 3. Make sure the HP All-in-One is the selected printer. 4. From the pop-up menu, choose Paper Type/Quality. 5. Click the Paper tab. 6. From the Paper type pop-up menu, choose the type of paper loaded in the input tray. Cause: The print or copy quality setting on the HP All-in-One is set too low. Solution: Check the quality setting. Use a higher quality setting to increase the amount of ink used for printing or copying. To change the print speed or quality 1. Make sure you have paper loaded in the input tray. 2. From the File menu in your software application, choose Print. 3. Make sure the HP All-in-One is the selected printer. 4. From the pop-up menu, choose Paper Type/Quality. 5. Click the Paper tab. 6. From the Paper type pop-up menu, choose the type of paper loaded in the input tray. 7. From the Quality pop-up menu, choose the appropriate quality setting for your project. To change the copy quality 1. Make sure you have paper loaded in the input tray. 2. Load your original print side down on the right front corner of the glass or print side up in the document feeder tray. If you use the document feeder tray, place the pages so that the top edge of the document goes in first. 3. In the Copy area, press Quality until the appropriate quality setting is lit. 4. Press Start Copy Black or Start Copy Color. Cause: You are printing on the wrong side of the paper. Solution: Load paper with the print side down. For example, if you are loading glossy photo paper, load the paper with the glossy side down. Printouts have vertical streaks Cause: The paper type is not suitable for the HP All-in-One. Solution: If the paper you are using is too fibrous, the ink applied by the HP All-inOne might not fully cover the surface of the paper. Use HP Premium Papers or any other paper type that is appropriate for the HP All-in-One. 154 Troubleshooting