HP J5780 User Guide - Macintosh - Page 162
To load envelopes, Cause, Solution, Replace the output tray.
UPC - 882780940253
View all HP J5780 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Chapter 11 NOTE: To avoid paper jams, tuck the flaps inside the envelopes. To load envelopes 1. Remove the output tray. 2. Remove all paper from the input tray. 3. Insert one or more envelopes into the far-right side of the input tray with the envelope flaps up and on the left. Slide the stack of envelopes forward until it stops. TIP: For more help on loading envelopes, refer to the diagram engraved in the base of the input tray. 4. Slide the paper-width guide inward against the stack of envelopes until it stops. Do not overload the input tray; make sure the stack of envelopes fits within the input tray and is not higher than the top of the paper-width guide. 5. Replace the output tray. Cause: The wrong type of envelopes is loaded. Solution: Do not use shiny or embossed envelopes or envelopes that have clasps or windows. Cause: The ink is smearing on the envelope. 160 Troubleshooting