Kyocera TASKalfa 2551ci 2551ci Operation Guide - Page 269

Using Various Functions > Functions Mixed Size Stapling Even with mixed paper sizes, if the sizes have the same width or same length as shown in the combinations below, the output can be stapled. Up to 30 sheets can be stapled. A4 A3 B5 B4 Letter Ledger A4 A3 B5 B4 Letter Ledger • A3 and A4 • B4 and B5 • Ledger and Letter • Ledger and Letter-R • 8K and 16K Letter-R Legal Letter-R Legal NOTE When performing Mixed Size Stapling, refer to Mixed Size Originals on page 6-14. Punch Punches holes in sets of finished documents. NOTE • The optional 1,000-Sheet Finisher and punching unit are required. • For details on paper sizes that can be punched, refer to Hole Punch Unit (Option) on page 11-27. • The inch model provides two-hole and three-hole punching. The metric model provides two-hole and four-hole punching. Item Punch Original Orientation Value 2 holes Left 2 holes Top 2 holes Right 3 holes Left 3 holes Top 3 holes Right 4 holes Left 4 holes Top 4 holes Right Top Edge on Top, Top Edge on Left Description Select the position of punch holes. For details on original orientation and position of punch holes, refer to Original Orientation and Punch Hole Position on page 6-20. Select the orientation of the original document top edge to scan correct direction. Press [Original Orientation] to choose orientation of the originals, either [Top Edge on Top] or [Top Edge on Left]. Then press [OK]. 6-19