Kyocera TASKalfa 2551ci 2551ci Operation Guide - Page 439

User Authentication and Accounting (User Login, Job Accounting) > Job Accounting Setting Apply Limit This specifies how the machine behaves when the counter has reached the limit of restriction. The table below describes the action taken. Item Immediately* Subsequently Alert Only Descriptions Job stops when the counter reaches its limit. Printing/scanning of the job continues but the subsequent job will be rejected. Job continues while displaying an alert message. * The next job will be prohibited in sending or in storing in the box. 1 Display the screen. 1 Referring to Job Accounting Setting on page 9-27, display the job accounting access screen. 2 Press [Change] of "Apply Limit". 2 Configure the settings. 1 Select [Immediately], [Subsequently], or [Alert Only]. 2 Press [OK]. Copier/Printer Count You can select how the copying and printing page counts are shown - either the total of both or each of copying and printing individually. The selection may influence restriction on the count and count method. For details, refer to Restricting the Use of the Machine (page 9-34), Counting the Number of Pages Printed (page 9-38), and Print Accounting Report (page 9-31). 1 Display the screen. 1 Referring to Job Accounting Setting on page 9-27, display the job accounting access screen. 2 Press [Change] of "Copier/Printer Count". 2 Configure the settings. 1 Press [Total] or [Individual]. 2 Press [OK]. 9-41