Kyocera TASKalfa 2551ci 2551ci Operation Guide - Page 465

Troubleshooting > Troubleshooting Message Checkpoints Corrective Actions Reference Page Removable memory ― error.* An error occurred in the removable memory. The job stopped. Press [End]. The possible error codes and their descriptions are as follows. 01: The amount of data that can be saved at once has been exceeded. Restart the system or turn the power OFF/ON. If the error still occurs, divide the file into smaller files. If the error still occurs, the removable memory is not compatible with the machine. Use the removable memory formatted by this machine. If the removable memory cannot be formatted, it is damaged. Connect a compatible removable memory. page 5-68 Removable Memory is ― full.* The job is canceled. Press [End]. ― Insufficient free space in the removable memory. Delete unneeded files. Remove originals in the Are there any originals left in the Remove originals from the ― document processor. document processor? document processor. Replace all originals and - press [Continue]. Remove originals from the - document processor, put them back in their original order, and place them again. Press [Continue] to resume printing. Press [Cancel] to cancel the job. * When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. S Message Scanner memory is full.* - Checkpoints Send Error.* - Skewed originals fed. ― Corrective Actions Reference Page Scanning cannot be performed due - to insufficient memory of the scanner. Follow the instructions on the screen. An error has occurred during transmission. The job is canceled. Press [End]. Refer to Responding to Send Error for the error code and corrective actions. page 10-28 See the caution attached on the ― document processor and check the originals. If the originals are jammed, follow the instructions on the screen to remove the originals. 10-25