Kyocera TASKalfa 2551ci 2551ci Operation Guide - Page 340

Status/Job Cancel > Checking the Remaining Amount of Toner and Paper (Paper/Supplies) Checking the Remaining Amount of Toner and Paper (Paper/Supplies) Check the remaining amount of toner, paper, and staples on the touch panel. 1 Display the screen. 1 Press the [Status/Job Cancel] key. 2 Press [Paper/Supplies]. Status Toner Information Toner Status Black (K) 100% Cyan (C) 100% Magenta (M) 100% Yellow (Y) 100% Waste Toner OK Paper Size A3 A3 A4 A4 A4 Type Plain Plain Plain Plain Plain Status 30% 30% 30% 30% 0% Others Type Staple Status OK Printing Jobs Sending Jobs Storing Jobs Device/ Communication Paper/ Supplies Close 2 Check the status. Check the remaining amount of toner and the status of the waste toner box in "Toner Information", and the remaining amount of paper in each paper source in "Paper". The items you can check are described below. "Toner Information" Remaining amount of toner You can check the remaining amount of each color toner levels from 100 to 0% (1% increments). Status of the waste toner box You can check the status of waste toner box. "Paper" You can check the size, orientation, type, and remaining amount of paper in each paper source. The remaining amount of paper is shown by 5 levels as 100, 80, 50, 30, and 0%, however, the paper in the multi purpose tray is shown by 2 levels as 100% and 0%. If the remaining amount of paper cannot be detected, "----" appears. "Others" You can check the status of staples and punch waste box. NOTE If the optional 1,000-Sheet Finisher and punch unit are installed, the "Others" section provides the status of the punch waste box and whether or not staples are available. 7-18