Kyocera TASKalfa 2551ci 2551ci Operation Guide - Page 309

Using Various Functions > Functions Priority Override Copy Advanced Setup Custom Box Functions USB Memory Functions Suspends the current job and gives a new job top priority. The suspended job resumes after the other job is finished. (Value: [Off] / [On]) NOTE This function is not available if current job was an override. Priority override may not be available depending on the status of the current print job and memory usage. In this case, try the interrupt copy. Interrupt Copy (page 5-22) Repeat Copy Copy Advanced Setup Enables additional copies in the desired quantity as necessary after a copy job is completed. For confidential documents, you can set up a password for the use of Repeat Copy. In such a case, the correct password must be entered to perform Repeat Copy. To register a password, press [# Keys] and enter a 4-digit password. IMPORTANT • A Repeat Copy job is cleared when the main power switch is turned off. • If you forget the password, Repeat Copy cannot be performed for that document. Make a note of the password beforehand if necessary. Repeat Copy is not available when the machine is equipped with the optional Data Security Kit. When the maximum number of Repeat Copy jobs to retain in the document box is set to 0 (zero), this function cannot be used. (Refer to Repeat Copy Job Retention on page 8-33.) You can select Repeat Copy as the default setting. For details, refer to Repeat Copy on page 8-20. Giving a file name to a copy job will facilitate identification of the data when copying. (Refer to File Name Entry on page 6-58.) Repeat Copy The Repeat Copy jobs are stored in the Job Box. Refer to Outputting Repeat Copy Jobs on page 5-65 to print out the Repeat Copy jobs. 6-59