Dell PowerConnect W-IAP92 Dell Instant 6.2.0.0-3.2.0.0 User Guide - Page 75
Removing a W-IAP from the Network, Editing W-IAP Settings, Changing W-IAP Name
View all Dell PowerConnect W-IAP92 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Figure 46 - Adding a W-IAP to the Instant Network 2. In the New Access Point window, enter the MAC address for the new W-IAP. Figure 47 - Entering the MAC Address for the New W-IAP 3. Click OK. Removing a W-IAP from the Network A W-IAP can be manually removed from the network only if the "Auto Join Mode" on page 71 feature is disabled. To manually remove a W-IAP from the network: 1. In the Access Points tab, click the W-IAP which you want to delete. An x appears against the W-IAP. 2. Click x to confirm the deletion. NOTE: The deleted W-IAP(s) cannot join the W-Instant network anymore and no longer appear in the Dell W-Series Instant UI. However, the master W-IAP cannot be deleted from the Virtual Controller. Editing W-IAP Settings This section explains how to change the W-IAP settings such as Name, IP Address and steps for configuring Adaptive Radio Management (ARM), Wired Bridging on Ethernet 0 Port, Uplink Management VLAN, and migrating from a Virtual Controller Managed Network to Mobility Controller Managed Network. Changing W-IAP Name To change the W-IAP name: 1. In the Access Points tab, click on the W-IAP that you want to rename. Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide 75 | Managing W-IAPs