Epson DFX-8500 User Manual - Page 183
Using the Hex Dump Mode, Hold down both
View all Epson DFX-8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
3. To end the self test, press the Pause button to stop printing. Tear off the page if necessary, and then turn off the printer. c Caution: Do not turn off the printer while it is printing. Always press the Pause button to stop printing and then turn off the printer. Using the Hex Dump Mode The printer can print data in hex dump mode, which allows experienced users to find the cause of communication problems between the printer and a software program. In hex dump mode, the printer prints all data received as characters in hexadecimal values. To use hex dump mode, follow these steps: 1. Make sure that paper is loaded in the printer. 2. Hold down both the LF/FF Load and Tear Off buttons while you turn on the printer. 3. Next, run a software program and send a print job to the printer. Your printer prints all the codes it receives from the software in hexadecimal format. 8-6 Troubleshooting