Epson DFX-8500 User Manual - Page 32
If you are connecting the serial interface, fasten the screws
View all Epson DFX-8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
4. If you are connecting the parallel interface, squeeze the wire clips together until they lock in place on either side of the 1 connector. If your cable has a ground wire, connect it to the printer's ground connector as shown below. If you are connecting the serial interface, fasten the screws on the cable connector. (If your cable has a ground wire, connect it to the printer's ground connector as shown above.) Note: If the screws that come with the cable do not fit into the connector lock nuts on the interface, replace the lock nuts with the optional lock nuts provided with the printer. Setting Up the Printer 1-13
4.
If you are connecting the parallel interface, squeeze the wire
clips together until they lock in place on either side of the
connector. If your cable has a ground wire, connect it to the
printer’s ground connector as shown below.
If you are connecting the serial interface, fasten the screws
on the cable connector. (If your cable has a ground wire,
connect it to the printer’s ground connector as shown
above.)
Note:
If the screws that come with the cable do not fit into the connector
lock nuts on the interface, replace the lock nuts with the optional
lock nuts provided with the printer.
1
Setting Up the Printer
1-13