Epson DFX-8500 User Manual - Page 186

Paper handling 8 The printer does not feed continuous paper properly. Cause What to do The wrong tractor may be selected. Check if the correct tractor arrow is lit on the Tractor Select indicator. Troubleshooting If the wrong tractor is selected, be sure paper is loaded to the standby position on the tractor you want to use. Then press the Front/Rear button to switch to that tractor. If the Paper Select displays a memory number other than "0", press the Pause button. Then press the Front/Rear button to switch to that tractor. The printer may be out of paper. Load paper onto the tractor. The tractor arrow on the Tractor Select indicator should be green. Note: If paper jams in the paper path, see "Clearing a Paper Jam" later in this chapter. Paper jams, does not feed smoothly, or feeds at a slant. Cause What to do The paper supply is too far from the printer. Make sure your paper supply is positioned within 1 meter (3.28 feet) of the printer. The rear cover is open. Close the rear cover before trying to feed the paper. Troubleshooting 8-9