Epson DFX-8500 User Manual - Page 203
Plain paper, recycled paper, and carbonless, Printable area
View all Epson DFX-8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
R The binding area should be flat and should have no creases. R The sprocket holes of all sheets in the form should be aligned properly. R The binding position should be outside the printable area. Width Length/page Number of copies Front Rear Total thickness Front Rear Weight Single sheets Multi-part forms Quality Printable area 101 to 406 mm (4 to 16 inches) 101 to 431 mm (4 to 17 inches) 7 sheets (1 original + 6 copies) 6 sheets (1 original + 5 copies) 0.53 mm (0.021 inch) maximum 0.46 mm (0.018 inch) maximum 52.6 to 82.7 g/m2 (14 to 22 lb) 41.4 to 56.4 g/m2 (11 to 15 lb) (weight/part) and within the total thickness Plain paper, recycled paper, and carbonless printable area A The minimum top margin (below the perforation) is 2.6 mm (0.1 inch). B A B The minimum bottom margin (above the perforation) is 4.2 mm printable area (0.165 inch). C The minimum left or right margin is 13 mm (0.51 inch). The maximum printable width is C C 345.4 mm (13.6 inches). Note: Position the sprockets or set your application software so that the printer does not print outside the printable area. A-6 Specifications