Epson DFX-8500 User Manual - Page 208
Overlapping multi-part forms with labels, A-11
View all Epson DFX-8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 208 highlights
Area measurements A 19 mm (0.75 inch) or more B 21.2 mm (0.84 inch) or more C 4.2 mm (0.17 inch) or more Overlapping multi-part forms with labels Same as labels except for the following: A A (side view) the top of B overlapping form label backing sheet D A the bottom edge of overlapping form perforation C G E F the bottom edge of H the glue point area The label on your form should be placed within the shaded area above, but not on the vertical or horizontal perforation. Area measurements A 13 ± 3 mm (0.51 ± 0.12 inch) B 80 mm (3.15 inches) C 4.2 mm (0.165 inch) D Thickness of the area where the label is attached: 0.53 mm (0.02 inch) or less E From the perforation to the top of the next overlapping form: 3.3 mm (0.13 inch) or more F From the perforation to the bottom edge of the glue point area: 17 mm (0.67 inch) or less G From the perforation to the bottom edge of the previous overlapping form: 13.3 mm (0.52 inch) or less H Total thickness including glue point dilation: 0.7 mm (0.028 inch) or less Specifications A-11