Epson DFX-8500 User Manual - Page 195

Printing starts lower on the page than you expected, or the bottom of a page is printed at the top of the next page. Cause What to do The top and bottom margin settings in your application software may be incorrect. Adjust them in your application software. Options The perforation cutter is installed and the printer does not feed continuous paper properly. Cause What to do The perforation cutter's connector is not plugged securely into the printer. Turn off the printer then check the perforation cutter connector. The perforation cutter is installed and the paper is not cut properly. Cause What to do The printer driver setting is not set correctly. Select the paper source you want to use in the printer driver. See Chapter 2. You didn't set the auto cut mode. Turn on DIP switch 3-7 to select auto cut mode. However, any setting made in the printer driver overrides the auto cut mode setting. You don't set the page length Set the page length to match your to match your paper. paper. 8-18 Troubleshooting