Epson Stylus Scan 2000 User Manual - Page 121
Replacing the Black Ink Cartridge, caution, warning
View all Epson Stylus Scan 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
caution Never turn off the printer while the Ppower light is flashing, unless the printer hasn't moved or made any noise for more than 5 minutes. caution Don't open the clamp or remove a cartridge except to replace it with a new one. Once you remove a cartridge, you can't reuse it, even if it contains ink. 8. Press down the ink cartridge clamp until it locks in place. Then press the R cleaning button and release it quickly. The printer moves the print head and begins charging the ink delivery system. (Even if you don't press the button, ink charging begins 60 seconds after you close the clamp.) The Ppower light flashes and the printer makes various sounds. Charging takes about 60 seconds. When it's finished, the Ppower light stops flashing and stays on. 9. Close the front cover. Replacing the Black Ink Cartridge You can replace a cartridge when the B black ink out light is flashing, or when it stays on. 1. Follow steps 1 through 4 on pages 112 and 113. 2. Pull up the black ink cartridge clamp. The cartridge rises up from its holder. warning If ink gets on your hands, wash them thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. Keep ink cartridges out of the reach of children. 3. Lift the cartridge out of the printer and dispose of it carefully. 114 Maintaining Your EPSON Stylus Scan