Epson Stylus Scan 2000 User Manual - Page 123
caution, The printer moves the print head and begins charging
View all Epson Stylus Scan 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
caution To avoid damaging the printer, never move the print head by hand. 3. Press the E load/eject button and hold it down for about three seconds until the print head moves to the color cartridge replacement position. The Ppower light begins flashing. caution Never turn off the printer while the Ppower light is flashing, unless the printer hasn't moved or made any noise for more than 5 minutes. 4. If you need to replace the color ink cartridge, go on to step 5 below. If you need to replace the black cartridge only, press the E load/eject button again and release it quickly to move the print head to the black cartridge replacement position. 5. Remove the old ink cartridge and install the new cartridge as described on page 113. Don't press the R cleaning button, however. 6. Press the E load/eject button and release it quickly. The printer moves the print head and begins charging the ink delivery system. The Ppower light flashes and the printer makes various sounds. Charging takes about 60 seconds. When it's finished, the Ppower light stops flashing and stays on. 116 Maintaining Your EPSON Stylus Scan