HP Xw4550 HP xw4550 Workstation - Service and Technical Reference Guide - Page 137
Exiting the utility, Configuring the boot order, Rebuilding the operating system
UPC - 883585505951
View all HP Xw4550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Exiting the utility To conclude RAID configuration, choose one of the following: ● Press Esc twice to exit the utility. ● Press Y to reboot. Configuring the boot order 1. Reboot the workstation and enter the Computer Setup (F10) Utility. 2. Select Storage>Boot Order. 3. Use the arrow keys to select ATAPI CD-ROM Drive, and then press Enter. 4. Use the up and down arrow keys to move ATAPI CD-ROM Drive to the top position, and then press Enter. 5. Verify that the xw4550 Recovery/OS CD/DVD is installed in the optical drive. 6. Press F10 twice, press Enter, and then press F10 again to accept changes and reboot. Rebuilding the operating system When the recovery CD boots, follow the onscreen instructions to install the operating system on the newly-created RAID Volume. ENWW Configuring SATA RAID devices 129