HP Xw4550 HP xw4550 Workstation - Service and Technical Reference Guide - Page 142
Using the Computer Setup (F10) Utility to reset CMOS
UPC - 883585505951
View all HP Xw4550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Using the Computer Setup (F10) Utility to reset CMOS 1. To reset CMOS using the Computer Setup (F10) Utility, access the Computer Setup (F10) Utility menu. When the Computer Setup message appears in the lower-right corner of the screen, press the F10 key. Press Enter to bypass the title screen, if necessary. NOTE: If you do not press the F10 key while the message is displayed, the workstation must be powered off, then on again, to access the utility. 2. From the Computer Setup (F10) Utility menu, select File>Set Defaults and Exit. This restores the soft settings that include boot sequence order and other factory settings. It does not, however, force hardware rediscovery. NOTE: You must reset the workstation passwords and any special configurations, along with the system date and time. 134 Chapter 7 Configuring password security and resetting CMOS ENWW