HP Xw4550 HP xw4550 Workstation - Service and Technical Reference Guide - Page 92
PCI, To install a PCI card
UPC - 883585505951
View all HP Xw4550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
PCI To remove a PCI card: 1. Disconnect power from the system (Predisassembly procedures on page 55), remove the side access panel (Side access panel on page 59), and remove the PCI retainer (PCI retainer on page 81), if installed. 2. Lift the PCI levers (1) by first pressing down and then up. 3. Lift the PCI card (2) out of the chassis. Store the card in an anti-static bag. 4. Install a PCI slot cover and close the PCI levers. If the PCI levers do not close, be sure all cards are properly seated and then try again. Figure 4-37 Removing the PCI card To install a PCI card: 1. Disconnect power from the system (Predisassembly procedures on page 55), remove the side access panel (Side access panel on page 59), and remove the PCI retainer (PCI retainer on page 81), if installed. 2. Lift the PCI levers (1) by first pressing down and then up. 3. Remove the PCI slot cover (2). 4. Lower the PCI (3) card into the chassis. Verify that the keyed components of the card align with the socket. 84 Chapter 4 Removal and replacement procedures ENWW