IBM 4230 User Guide - Page 106
See Adjusting the Tear-off
View all IBM 4230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Unloading Forms To unload forms from the F2 forms device, follow these steps: 1. Open the acoustic cover. 2. Tear off the forms at the tear bar. See "Adjusting the Tear-off Position" on page 1-79 for the procedure. 3. Press Stop. The printer displays NOT READY 4. Open the front paper door as follows: a. Pull the door up until it will not go any higher. b. Push the door back slightly to lock it in the open position. Paper Door 1-84 User's Guide
Unloading Forms
To unload forms from the F2 forms device, follow these steps:
1. Open the acoustic cover.
2. Tear off the forms at the tear bar.
See “Adjusting the Tear-off
Position” on page
1-79 for the procedure.
3. Press
Stop
.
The printer displays
4. Open the front paper door as follows:
a. Pull the door up until it will not go any higher.
b. Push the door back slightly to lock it in the open position.
Paper Door
NOT READY
<A>
1-84
User’s Guide