IBM 4230 User Guide - Page 242
²17 Communications Check
View all IBM 4230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 242 highlights
17 COMMUNICATIONS CHECK This status code is automatically reset by the computer and should only appear briefly on the display. If the printer continues to display the message, follow these steps: CAUTION: Make sure the machine is turned Off (O) before you connect or disconnect the power cord or other cables. If the machine has cables other than the power cord, you must connect them before you plug the power cord into an outlet. You must first unplug the power cord from the outlet when you remove the other cables. 1. Turn the power Off (O). 2. Check that the cable is connected to the printer and to the computer. 3. Turn the power On (|). 4. If the status code occurs again, call for service. B-12 User's Guide
This status code is automatically reset by the computer and should
only appear briefly on the display.
If the printer continues to display
the message, follow these steps:
CAUTION:
±
Make sure the machine is turned Off (O) before you connect
or disconnect the power cord or other cables.
±
If the machine has cables other than the power cord, you
must connect them before you plug the power cord into an
outlet.
You must first unplug the power cord from the outlet
when you remove the other cables.
1. Turn the power Off (O).
2. Check that the cable is connected to the printer and to the
computer.
3. Turn the power On (|).
4. If the status code occurs again, call for service.
²17 COMMUNICATIONS CHECK
B-12
User’s Guide