IBM 4230 User Guide - Page 261

A8C Invalid Page Length Notify System Programmer An attempt was made to set the page length to a value greater than 288.98 cm (113.77 in.) using the SVF, SLD, or SSLD commands. This error requires a data stream correction by the system programmer. To reset the printer: 1. Turn the power Off (O). 2. Wait 10 seconds, then turn the power On (|). A97 Undefined Character Notify System Programmer An attempt was made to print a character that is not defined in the current code page. This error requires a data stream correction by the system programmer. Press Stop then Start to clear the error on the operator panel. Axx APPLICATION CHECK SEE USER'S GUIDE If you have a Axx status code other than A89, A8C, or A97, follow the procedure below. 1. Press Stop. 2. Press Start. 3. Contact the system programmer and report the data stream error. Appendix B. Problems B-31